Using Additional Handsets; Registering A New Handset; Internal Calls - Daewoo International DTD-7000 Manual Del Usuario

Reset if you have forgotten your PIN code
1. Press and hold
2. Press and hold
3. Press to confirm. After a few seconds the base will beep and the handset
and base will reset automatically.

Using additional handsets

If you purchase a new handset to use with your Daewoo DTD-7000 it will have to be
registered to the base. You will need to do this before you can use it.
Registering a new handset to your Daewoo DTD-7000 base
At the new handset:
1. Follow the new handset's user guide to set the handset in registration mode.
At the Daewoo DTD-7000 base:
2. Press and hold the base
validation tone (two beeps), then release the button.
Making internal calls
You can make internal calls between two Daewoo DTD-7000 handsets.
Press . Enter the other handset number (1 or 2). The called handset will ring. If
there is no response, press
Receiving internal calls
When the handset rings, press
All manuals and user guides at all-guides.com
to switch the handset off and remove the handset batteries.
as you replace the batteries. Wait until DEFAULT is shown.
button for at least 5 seconds, until you hear the
to end the call at your handset.
to answer. Press
15
to end the call.