Lifting Pole - wissner-bosserhoff sentida 7-i Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 292

7.2 Lifting pole

The holder for the lifting pole is located at the head end of the patient surface frame.
Attention!
Grab handle and belt consist of high-quality plastic. However, all plastics are not
uncon-ditionally resistant to aging, so that grab handle and belt can break or tear
after long usage. This can cause injuries. Replace grab handle and belt after 4 - 5
years at the latest. The year of manufacture is imprinted on the product.
Lifting pole
If you want to attach a lifting pole:
From above, insert the lifting pole into the holder.
It is held in its high position by a bolt.
Turn the lifting pole, so that the bolt lies in one of the notches provided in the holder.
Vertical and horizontal adjustment is possible.
Attention!
Under high load, the grab handle and belt can break or tear and cause injuries. Only
use a patient lifting pole under a maximum load of 750 N (approx. 75 kg).
▪ Attach the grab handle to the patient lifting pole, using the belt.
Grab handle with
belt
97
Tabla de contenido

Solución de problemas

loading

Tabla de contenido