Placement; Cleaning Modes; Recycle - OzonAir PURIFY PRO Manual Del Usuario

0 6
PL ACEMENT
The product can either be placed on a flat surface
with its stand or mounted on the wall by removing the
stand. The product should be placed high, for example
on a table or a bookshelf.
WARNING! - Do not place the product so the air
intake or outlet is blocked, this may cause the product
to shut down.
Remove /
attach stand
Wall mounted /
bookshelf.
Recommended at
180 cm
E N
10
0 7
CLE ANING MODE
PURIFY
Purifies the air continuously by using photocatalysis and air exchange
through HEPA filter. Use for continuously purifying the air.
CLEAN
Deeper cleaning of air and surfaces by combining photocatalysis and
ionization together with HEPA filter. Use when extra cleaning is required
or for continuous use in polluted environments.
OZONE
The ozone function is to be used in heavy polluted areas such as
unoccupied garbage rooms, locker rooms and public toilets. Ozone
exposure can cause symptoms such as irritated eyes, throat and nose.
It is not recommended that humans, pets or plants are present during
ongoing treatment.
Scent from cleaning modes
• Purify uses photocatalysis which can generate a scent that can be
compared to light metal or electricity. The scent appears initially
when the product reacts to large quantities of contaminants but will
decrease with time.
• Ozone mode uses the gas ozone and can initiate a smell similar to chlorine.
Some people can be hypersensitive to ozone, even in small doses.
Recommend settings
ASTHMA & ALLERGY
Use Purify mode and place the product as central as possible. Use high
fan to get a high air exchange rate through the HEPA filter. If severe
asthma or allergy, the product can be moved to the bedroom. During
certain circumstances such as pollen season or in dusty environments,
use Clean mode.
ODORS
Use Clean mode and place the product as close to the source of the odor
as possible. If desired effect is not reached, use Ozone mode for a couple
of hours and then return to Clean mode.
SMOKE
Use Clean mode for a few days to remove the worst parts of the smoke
then use Purify mode continuously. If odor still can be detected, use
ozone mode.
MOLD
Use ozone to remove the odor from mold and mold spores. Use clean
mode continuously for as long as the problem remains. Always investigate
and remove the source of the mold.
NOTE - See chapter 11 for specialized 24-hour programs
to use during certain circumstances.
1 1 0 8

RECYCLE

Electrical components. Do not dispose the product with
your regular household waste. Return the product to your
local recycling facility for proper recycling. Recycle the
UV and ozone lamps in containers intended for lamps
containing mercury. Recycle the product packaging in
applicable containers for paper and plastic. The battery
inside the remote shall be sorted accordingly.
This symbol indicates that the product shall not be
disposed with regular household waste. The product
contains electrical components and should be handled
properly.
E N
11