Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PARTS LIST:
2
3" Round Bent Nerf Bars
1
Driver/left side Front Mounting Bracket
1
Passenger/right side Front Mounting Bracket
1
Driver/left side Rear Mounting Bracket
1
Passenger/right side Rear Mounting Bracket
1
Driver/left side Front Support Bracket
1
Passenger/right side Front Support Bracket
Passenger/right side
Rear Support Bracket
Passenger/right
side Rear Bracket
Passenger/right
side Front Bracket
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED.
1. Start the installation under the passenger/right side of the vehicle. Locate the front (3) factory studs
along the inner side of the body panel, (Figure 1). NOTE: Use a wire brush or die to remove paint
buildup on the threaded studs.
2. Select the Passenger/right side Front Mounting Bracket. Attach the mounting bracket to the (3) factory
studs with (3) 8mm Flat Washers and (3) 8mm Nylon Lock Nuts, (Figures 2 & 3). Leave Bracket loose
at this time.
3. Locate the front body mount, (Figure 4). Remove the factory body bolt and factory washer, (Figure 5).
NOTE: Chase thread on body bolt to remove paint buildup before reinstalling. Select the passenger
side front support bracket, (Figure 6). Line up the upper slot on the bracket with the body bolt hole.
Reuse the factory body bolt and washer to attach the bracket to the top of the body mount, (Figure 7).
4. Move to the rear mounting location, (Figure 8). Repeat Steps 2 & 3 for the passenger side rear
mounting and support bracket installation, (Figures 9 & 10).
NOTE: The Front Support Bracket is shorter
than the Rear Support Bracket.
Passenger/right side
Front Support Bracket
Page 1 of 4
1
Driver/left side Rear Support Bracket
1
Passenger/right side Rear Support Bracket
4
1/2" x 2" Hex Bolts
4
1/2" x 1-1/2" x 1/8" Flat Washers
4
1/2" Lock Washers
12
8-1.25mm Nylon Lock Nuts
12
8mm x 24mm x 2mm Flat Washers
Driver/left side Rear
Support Bracket
Driver/left side Front
Support Bracket
Driver/left side
Rear Bracket
"
3
ROUND BENT NERF BARS
2019 RAM 1500 QUAD CAB
EXCLUDES BODY LIFT KIT
Driver/left side
Front Bracket
Tabla de contenido
