Troubleshooting; Corrective Action - AND UA-704 Manual De Instrucciones

TROUBLESHOOTING

✓
Problem
Display is blank,
even when the
power is turned
on.
The device will
not measure.
Readings are too
high or too low.
Other
NOTE: If the actions described above do not solve the problem, con-
tact A&D Medical or Auto Control Medical at the numbers listed at
the bottom of these pages . Do not attempt to repair the device your-
self .
E-14
✓
All manuals and user guides at all-guides.com
Probable cause
Battery is drained.
Battery terminals are
not in the correct
position.
The cuff is not fas-
tened properly.
You moved your arm
or body during the
measurement.
The cuff position is
not correct.
You are wearing the
wrong cuff size.
The blood pressure
reading is different
from that measured
at a clinic or doctor' s
office.
Cuff will not inflate.
LifeSource Health Line (Toll-Free): 1-888-726-9966

Corrective action

Replace with a new battery.
Place the battery with
negative and positive ter-
minals matching those
indicated in the battery
compartment.
Fasten the cuff correctly.
Make sure you remain
very still and quiet during
the measurement.
Adjust the cuff position.
Raise your hand so that
the cuff is at the same
level as your heart.
See Pg. E-5 "Selecting the
Correct Cuff."
See Pg E-12 "Keys to
Successful Monitoring."
Remove the battery.
Place back in correctly,
and try the measurement
again.
Check air tube connec-
tion inside battery cover.