Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Patravi autodate
Legend
Date
crown
Position
1:
Winding
1 2 3
Position
2:
set date
Position
3:
set time
second
En
6
Your watch
the Patravi AutoDate displays the date and time
in streamlined elegance. set in a classic round
case and made more refined with exquisite mate-
rials, the timepiece stands for stylish understate-
ment. the Patravi AutoDate is available in various
configurations with different sizes associated
with them.
Technical Data
Automatic movement
cFB 1950 / cFB 1963
Depth of the movement
4.6 mm / 4.8 mm
Diameter of the movement
26.2 mm / 28.6 mm
number of jewel bearings
25 / 26 / 39
Water resistance
50 m (5 atm)
(see the chapter on "Water resistance")
Start the watch
Set time
the movement is wound by the motion of the
In order for the date to properly move at midnight,
wrist when worn. When not worn, the watch stops
the hour hand must intentionally be set to a.m. or
after approximately 38 hours and has to be wound
p.m. based on the current time.
manually.
1
rotating the crown in the
1
counter clockwise direction
will automatically release it
to position 1.
2
Manually wind the move-
2
ment by rotating the crown
at least 30 times in the
clockwise direction.
3
Pull the crown until it is in
position 3. the second hand
does not move.
Move the crown counter-
clockwise until the date
changes. then deliberately
set the current time either
a.m. or p.m.
Push the crown back into
position 1. the second hand
is back in motion.
7
En
Tabla de contenido
