Technical Data - Carl F. Bucherer Patravi scubatec Instrucciones

Patravi scubatec
Legend
Date
crown
Position 1: Winding
1 2 3
Position 2: set date
Position 3: set time
rotatable bezel
second
En 6
Your watch
the Patravi scubatec dives into new dimensions:
the sturdy diving watch ensures pinpoint legibility
with a diameter of 44.6 mm. the unidirectional
rotatable bezel, with its 4-mm sapphire crystal and
its automatic helium valve, offers functionality
under extreme conditions. the striking timepiece
with its stainless steel case is equipped with a
highly-precise, chronometer-certified cFB 1950.1
automatic movement. Whether on land or water –
the Patravi scubatec is certain to come up in style.

Technical Data

Automatic movement cFB 1950.1
Depth of the movement 4.6 mm / 4.8 mm
Diameter of the movement 26.2 mm
number of jewel bearings 25 / 26
Water resistance 500 m (50 atm)
(see the chapter on "Water resistance")
Start the watch Set time
the movement is wound by the motion of the In order for the date to properly move at midnight,
wrist when worn. When not worn, the watch stops the hour hand must intentionally be set to a.m. or
after approximately 38 hours and has to be wound p.m. based on the current time.
manually.
1 rotating the crown in the 1
counter clockwise direction
will automatically release it
to position 1.
2 Manually wind the move- 2
ment by rotating the crown
at least 30 times in the
clockwise direction.
3
Pull the crown until it is in
position 3. the second hand
does not move.
Move the crown counter-
clockwise until the date
changes. then deliberately
set the current time either
a.m. or p.m.
Push the crown back into
position 1. the second hand
is back in motion.
7 En