Starting The Engine - Rapid MONDO 1301 Instrucciones Para El Uso

4.

Starting the engine

It is assumed that you have read and under-
stood the chapter entitled “Safety and Dan-
gers”.
4.1 Starting the petrol engine
Set twist grip for forward motion to the "0" po-
sition.
• Open the fuel shut-off cock.
• Move the choke to position
• Accelerator in the middle position.
• Press the dead man’s handle down, and lock it
in position with the brake lever.
• Pull the reversing starter by applying uniform
force. Then let the cable wind up again slowly.
• Engine running
• Slowly push the choke to the starting
position
• Release locking brake
4.1 Starting the diesel engine
Set twist grip for forward motion to the "0" po-
sition.
Press down the dead man’s handle and pull the
locking brake upwards, locking this using the
locking stud.
• Accelerator in the middle position.
• Pull the reversing starter by applying uniform
force. Then let the cable wind up again slowly.
• Engine running
• Release locking brake
Turning the engine off
• Release the dead man’s handle and the ma-
chine will switch off automatically.
NOTE
Abid by te rules found in the engine manufac-
turer's operating instructions provided.
48