Volume Control; Playback Control - Trevi DJ 1280 BTR Guia De Inicio Rapido

ENGLISH
CONNECTION TO A BLUETOOTH DEVICE
1. Set switch On/Off/BT/MP3/RADIO (1) to the BT.
If it is the first pairing with a new BT device hold for 3 seconds, the Play / Pause button (2).
The indicator LED (5) will turn blue and begin to flash.
2. Enable the Bluetooth ® connection on the external device (phone, tablet, etc ...), referring to its manual
3. From external device to perform a search for devices and select "TREVI DJ1280BTR" o "R-16"; If prompted, type
the key code "0000".
4. When coupling with the external device will place the LED (5) will flash slowly.
Note: A paired device, it may happen that the connection is interrupted (for example, when the devices connected via
Bluetooth stray too far from each other); Normally the connection is automatically restored, otherwise it is necessary
to perform the pairing procedure again from step 1 to 4.
Whenever you want to pair your headset to a new device, you need to make a new pair repeating the above proce-
dure from step 1 to step 4.
During mating the two devices must be placed at a distance less than one meter in normal use the maximum distance
for a proper functioning 'of about 8-10 meters.
CABLE CONNECTION TO AN EXTERNAL DEVICE
You can use the headset like regular headphones HiFi multifunction connecting cable to an external device equipped
with a headphone jack using the cable supplied stereo Jack-Jack:
1. A headset turned off connect a power cable to the headphone jack into the AUX IN jack (8), connect the other
plug of the cable into the jack HEADPHONES of the device.
2. Turn on the external device and start playback sound.

VOLUME CONTROL

You can adjust the sound volume with the volume adjustment keys.
1. Hold the button Next (3) to increase the volume.
2. Hold the button Prev (4) to decrease the volume.

PLAYBACK CONTROL

Using the buttons on the headset, you can control the playback of songs on the associated device.
Once you have paired the headset to your device, turn the music playback.
Sara 'can run the following commands:
- Press the PLAY / PAUSE button (2) to play or pause the song.
- Press the NEXT button (3) to advance to the next track.
- Press the PREV button (4) to move to the previous track.
Note: Due to the continuous evolution of Bluetooth ® technology, some devices may not be compatible or fully
compatible with the device TREVI DJ1280BTR.
MANAGING MOBILE PHONE CALLS
Through the headphones are different operations when receiving calls on mobile phone:
Answering a call: press once on the Play / Pause button (2) to start the conversation.
Ending a call: a conversation once finished press the Play / Pause button (2).
Reject an incoming call: Press for 3 seconds, the Play / Pause button (2).
MANAGEMENT OF MUSIC PLAYBACK WITH SD CARD
1. Insert the SD CARD into the slot.
2. Set switch On/Off/BT/MP3/RADIO/RADIO (1) to the MP3 position
- Press the PLAY / PAUSE button (2) to play or pause the song.
- Press the NEXT button (3) to advance to the next track.
- Press the PREV button (4) to move to the previous track.
All manuals and user guides at all-guides.com
PAG.7
DJ 1280 BTR