Connection To A Computer; Volume Control; Playback Control - Trevi DJ 1265BT Manual Del Usuario

ITALIANO ENGLISH

CONNECTION TO A COMPUTER

1. Press the PLAY/PAUSE key (1) and hold it pressed until the led indicator turns on alternating red and blue light.
2. If the computer features an integrated Bluetooth device, activate it and search for new Bluetooth peripheral
devices by means of its management software.
If the computer does not feature any integrated Bluetooth devices, install an external Bluetooth device and its
relevant management software. When the Bluetooth device is installed, search for new Bluetooth peripheral devices
by means of its management software.
3. Among the peripheral devices found, select "DJ1265BT" and enter the key code "0000" if required.
4. When the connection to the external device is established, the led indicator (2) will blink.

VOLUME CONTROL

Volume can be adjusted by means of the volume selector(5).
1. Set the selector switch (5) to position and hold VOL + to increase the volume.
2. Set the selector switch (5) to position and hold VOL- to decrease the volume.
When the minimum or maximum volume is reached, a warning tone will be heard.

PLAYBACK CONTROL

The keys on the headphones allow you to control the playback of the tracks contained in the connected device.
Once the headphones are connected to the device, start the playback.
The following actions are available:
-Press the PLAY/PAUSE key (1) to start or stop the track playback.
-Set the selector switch (5) in position : and let him to go to the next track.
-Set the selector switch (5) in position 9 and leave it to go to the previous track.
Note 1: This function is only available on Bluetooth® devices supporting the AVRCP profile.
Note 2: Bluetooth® technology is constantly evolving; therefore, some devices may not be compatible - fully or in
part - with the TREVI DJ1265BT device.
MANAGING MOBILE PHONE CALLS
The headphones allow for various operations while receiving calls on your mobile phone:
Answer to a call: press the PHONE key (3) once to start the conversation.
End a call: when the conversation is finished, press the PHONE key (3) once.
Refuse an incoming call: press and hold the PHONE key(3).
Call the last dialled number: press the PHONE key (3) twice.
Divert the conversation from the HiFi headphones to the phone, and vice versa: if you are using the
headphones during a phone conversation and you wish to return to standard mobile phone use, hold the PHONE key
(3) pressed. If you wish to return to the headphones mode, hold the PHONE key (3) pressed again.
VOICE DIALING FUNCTION (on compatible devices)
The Voice Dialing function allows you to search and select an item in your contact list and call it by simply pressing a
key on the headset, without using the phone.
1. Press the PHONE key (3) ; a confirmation tone will be heard.
2. The Voice Dialing function will be enabled on the phone. Pronounce the desired name clearly; the phone will start
the search and will repeat the corresponding item found. The number found will be called automatically.
3. Press the PHONE key (3) to stop the call to the selected number.
Note 1: The Voice Dialing function is not supported by all the phones or devices.
Note 2: The Voice Dialing performance level depends mainly on the management software implemented on the phone
or Bluetooth device. Perfect operation of the search function is not guaranteed.
PAG.6
DJ 1265BT DJ 1260BT