Rockwell Automation Allen-Bradley PanelView 600 Instrucciones De Instalación página 14

All manuals and user guides at all-guides.com
14 PanelView 600 Terminals
To connect DC power to the PV600 terminal:
1. Secure the DC power wires to the DC Negative and DC Positive screws on the
terminal block.
2. Secure the Earth Ground wire to the
3.
ATTENTION
!
ATTENTION
!
4. Apply 24V dc power to the terminal.
+
41061-004-01(D)
Explosion Hazard - Do not connect or disconnect
equipment while circuit is live unless area is known to be
non-hazardous.
Do not apply power to the terminal until all wiring
connections have been made. Failure to do so may result in
electrical shock.
Power Terminal
Block (fixed)
Earth Ground
DC Negative
DC Positive
screw on the terminal block.