Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Specifications
Turntable specifications
Type
2-Speed, fully automatic operation
Motor
DC motor
Drive method
Belt drive
Speeds
33-1/3 RPM, 45 RPM
Turntable platter
Die-cast aluminium
Wow and flutter
< 0.2 % WRMS (33 RPM) at 3 kHz
Signal-to-noise ratio
> 60 dB
Outputs levels
"PHONO"
3.5 mV nominal at 1 kHz, 5 cm/sec
"LINE (MM)"
220 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-amp gain (MM)
36 dB nominal, RIAA equalized
Phono Pre-amp gain (MC)
56 dB nominal, RIAA equalized
Tonearm specifications
Type
Static balanced straight shaped w/soft
damping control
Effective length
221.5 mm
Overhang
19 mm
Maximum tracking error angle
Less than 3°
Stylus pressure adjustment range
1 to 4 g
Applicable cartridge weight range
14.5 to 20 g
(including headshell)
Cartridge and headshell specifications
Cartridge Model
AT91R
Cartridge Type
VM Dual Magnet
Recommended load impedance
47,000 ohms
Output voltage
3.5 mV (mV at 1 kHz, 5 cm/sec)
Stylus
0.6 mil bonded conical
Cantilever
Aluminum pipe
Tracking force range
1.5 to 2.5 g (standard 2.0 g)
Cartridge weight
5.0 g
Headshell model
AT-HS3
Headshell weight
11.1 g
Headshell overhang adjustment
8 mm
15
All manuals and user guides at all-guides.com
General specifications
Power supply requirements
Power consumption
Dimensions
Weight
Accessories included
Replacement stylus (sold
separately)
Replacement headshell (sold
separately)
Replacement belt (sold separately) AT-LP3 exclusive belt
Specifications are subject to change without notice due to improvements.
120 V / 60 Hz
2 W
435 mm (17.13")×353 mm (13.90")×
128 mm (5.04")
(W×D×H)
5.4 kg (11.91 lbs)
Rubber mat, Dust cover, Platter (with
drive belt), Counterweight, Headshell
(AT-HS3) with VM stereo cartridge
(AT91R), 45 RPM adapter, Power cable
ATN91R
AT-HS3
Tabla de contenido
Solución de problemas
