MaxPro MPBCO355 Manual Del Usuario página 9

To adjust the width of the vice, lift the vice lock release lever (D) and push the vice forward until the vice is
touching the work piece, then lower the vice lock release lever so that its teeth engage those of the vice.
To secure the work piece in place, rotate the vice handle grip (07) clockwise. To remove an object from the
vice, turn the vice handle in a counter-clockwise direction.
To adjust the downward travel of the cut off disc, this saw is equipped with a stop screw (E). Adjustments
are made by first loosening the lock nut (F), turning the stop screw to the desired position, and then
retightening the lock nut.
OPERATION
First press the Lock ON button (04) and then press the ON/OFF Switch trigger (03) to start the Cut Off Saw.
Release the ON/OFF Switch trigger when the work piece is cut. Allow the disc to stop completely before
removing the work piece. Allow the work piece to cool before handling.
CAUTION: Wear safety eyewear and dust filters or respirators while using this tool.
WARNING: Be prepared for kickback when using the saw. Kickback may cause the saw to jump
backwards, and cause serious injury to the user.
9
All manuals and user guides at all-guides.com
Cut Off Saw MPBCO355 User Manual
GB