Remote Control; Heating Power - Heating Period - Lenz rcB 1200 Manual De Instrucciones

REMOTE CONTROL

The lithium pack rcB 1200 / lithium pack rcB 1800 battery packs can be controlled via the Lenz
HeatApp* for smartphones. The batteries must be in "Pairing Mode" to be able to couple them
properly with the smartphone.
Pairing Mode
Please switch the desired batteries to "Pairing Mode". For this purpose, push the control button
(Fig. 1.3.) for approx. 10 seconds until the heat setting displays (Fig. 1.2.) are blinking and
then immediately release the control button. The heat setting display in the middle is flashing
constantly.
Note: The Pairing Mode remains active for 2 minutes! If no pairing takes place during this
time, this mode will end automatically!
*The optional Lenz Heat App for convenient control is available for download via the Android Play
Store and the Apple Store.
Requirements for using the Lenz Heat App / Lenz Heat App Basic:
Bluetooth SMART Ready, Android Version 4.3 or higher or iOS Version 7.0 or higher

HEATING POWER - HEATING PERIOD

The heating times for the heat settings are outlined in the following table for your information.
Heat Heating period,
setting lithium pack
rcB 1200
(operation with
sock)
1 10.0 – 14.0 h
2 5.5 – 7.5 h
3 3.5 – 4.5 h
LED, steady on – Pairing Mode
Heating period,
lithium pack
rcB 1200
(operation with
vest)
5.5 – 7.5 h
3.0 – 4.0 h
2.0 – 2.5 h
– 29 –
Heating period,
lithium pack
rcB 1200
(operation with
brace)
5.5 – 7.5 h
3.0 – 4.0 h
2.0 – 2.5 h
Heating period,
lithium pack
rcB 1200
(operation with
glove)
6.0 – 7.5 h
3.0 – 4.0 h
2.0 – 2.5 h