Introduction; Intended Use; Equipment - Parkside PHSL 900 B4 Manual Del Usuario

LONG-REACH HEDGE TRIMMER
PHSL 900 B4

Introduction

Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as
described and for the specified range of applica-
tions. Please also pass these operating instructions
on to any future owner.

Intended use

This tool is intended for cutting and trimming
hedges, bushes and flowering shrubs in the home
garden. This is a hand-held appliance with an
integrated engine unit with linear reciprocating
cutting blades.
The appliance may only be used as described and
for the specified application areas. The appliance
is not intended for commercial use.
The appliance is designed for use by adults. This
appliance is not intended for use by anyone
(including children) with reduced physical, sensory
or mental capabilities or lack of experience and/or
knowledge. The use of the appliance in rain or in
humid environments is prohibited.
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents. The manufacturer accepts no
responsibility for damage(s) attributable to misuse.
WARNING!
► Hedge trimmers are not suitable for use by
children.
■ 2 │ GB │ IE

Equipment

Motor unit
1 Tommy screw
2 Nut
3 Boom
4 Screw
5 Round handle
6 Carrying lug
7 Swivel element
8 Release button
9 Safety lock-out
0 On/Off switch
q Mains cable
w Strain relief
Hedge trimmer attachment
e Cutter bar
r Gearbox casing
t Lock/release
z Base plate (hedge trimmer)
u Control lever
i Handle
o Front boom
p Locking pin
a Drive shaft
s Protective cap
Boom
d Tommy screw
f Boom
g Locking pin
h Drive shaft
j Protective cap
Accessories
k Shoulder strap
l Blade guard
y Safety goggles
x Hexagon spanner 4 mm
PHSL 900 B4