A signal tone sounds and the Bluetooth LED PAIR flashes blue quickly. The sound
system is now in search mode again and you can perform a new device pairing.
To re-establish the Bluetooth connection with the last connected audio output
device, press and hold the
continuously lights up blue and a signal tone sounds on the sound system.
10. Operation
10.1. Adjusting the volume
Turn the volume controller
towards
, to decrease the volume.
Immediately after being switched on, the sound system always starts at
the set volume regardless of the last volume setting.
10.2. Super bass
Press the SUPER BASS button to enhance low frequencies and switch on bass
amplification.
BASS appears on the display.
Press the SUPER BASS button again to switch off bass amplification.
BASS disappears from the display.
10.3. Equaliser
Press the EQ button once or several times to activate one of the preset equaliser
settings (Flat, Classic, ROCK, Pop or JAZZ).
The selected equaliser setting is then shown on the display.
10.4. Party LED light
Press the LIGHT button once or several times to activate preset party LED light
effect L-1 to L-5.
Light effects L4 and L5 light up to the beat of the music played.
Press the LIGHT button several times until LOFF is shown on the display to
deactivate all party light effects.
button again until the Bluetooth LED PAIR
VOL.
towards
to increase the volume or
DE
FR
NL
EN
IT
ES
103