EMPTYING THE WATER TANK
During the process of cooling, some water will be extracted from the air into the unit.
Most of this water is used to cool the unit and make it run more efficiently. This is a
feature not found in most portable air conditioners. If the unit is operated in VERY
HUMID air, water will collect in the container inside the unit. If the water container is full,
the compressor will stop, but the fan will continue to circulate the air. The warning light
will flash to inform you to empty the internal container. To make the cooling function
work again, empty this container– must be emptied.
To resume operation, empty the water tank according to the following steps:
1. Turn off the unit.
2. Position a flat container or dish on the floor under the drain hole. Do not allow the
water to drip continuously into the container as it might easily overflow.
3. Remove the drain knob. the water will flow in the container. When this is nearly full,
replace the plug to stop the water flow and empty it. Repeat this process until all
water has been removed.
4. Replace the drain knob. The warning light should not flash any longer.
CONTINUOS DRAINAGE
1. Connect the drain tube to the valve.
2. Make sure the drain tube drains downward.
3. Place a pan or bucket under the drain tube to hold the condensate water or let the
tube drain down a gravity drain.
All manuals and user guides at all-guides.com
-34-