Rear Panel Operation - Alesis SUMO Manual De Inicio Rápido Para El Usuario

All manuals and user guides at all-guides.com

Rear panel operation

Power Cord Outlet – Plug a standard IEC cord into this jack and into a properly
1.
grounded AC outlet.
Headphones – Plug in a set of stereo headphones using a 1/4" stereo plug.
2.
Using the headphone jack disconnects the Sumo's internal speaker.
Stereo Link Output – Use a ¼" tip-sleeve (TS) cable to connect this jack to the
3.
input of another amplifier for true stereo. The Sumo provides true stereo output
instead of the standard mono; many of the Sumo's excellent effects will sound
even better when you listen to them in stereo. If you don't have a second amplifier,
you can enjoy the stereo effects by listening with headphones.
¼ " Instrument Inputs – Use ¼" cables to connect synthesizers, drum machines,
4.
and other devices. Use two cables for stereo. For mono sources, use either one
of the the left and right inputs.
Note: For the cleanest signal, use "balanced" tip-ring-sleeve (TRS) cables.
"Unbalanced" tip-sleeve (TS) cables may also be used, but they are more likely to
conduct hum and other electromagnetic noise.
Microphone Input – Plug a microphone into this input using an XLR cable.
5.
You can use both the microphone input and the ¼" inputs on channel 1 at the
same time.
Note: The microphone input does not provide phantom power.
3