Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Before Operating Your Dryer
Read your dryer Use and Care Guide. It has
important safety and warranty information. It also has
many suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Use and Care
Guide before operating this appliance.
Operating Steps
Read Drying Procedures in your Use and Care
Guide. It explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Temperature and Wrinkle-Rid/Signal
controls as desired.
Printed in U.S.A.
All manuals and user guides at all-guides.com
®
6. Turn cycle selector clockwise to desired
setting.
7. Start dryer. Turn the Turn to Start control
clockwise to ON. Hold for 1-2 seconds and
release.
8. When Signal Option control is on, a signal
will sound near the end of the cycle. When
Wrinkle-Rid/Signal option is selected, a signal will
sound every 5 minutes as a reminder to remove
the load during WRINKLE RID.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
the Air Fluff-No Heat cycle only.
To avoid fire hazard, do not use heat to
OPERATING INSTRUCTIONS
80412/90412
Select the temperature most suitable for each load.
The REGULAR-HIGH HEAT, PERM PRESS-
MEDIUM HEAT, KNITS-MEDIUM-LOW HEAT, and
DELICATES-LOW HEAT temperature settings may
be used with any cycle setting.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
The Automatic Dry and Timed Dry cycles end with a
cool down period. The heat automatically turns off
and the load continues to tumble during the cool
down period. This reduces wrinkling and makes
items easier to handle during unloading.
Drying time varies depending on size and dampness
of load, weight and fabric type. Room temperature
and humidity, type of installation and electrical
voltage or gas pressure can also affect drying time.
P/N 134938100 (0708)
Manuales relacionados para Kenmore 80412
Resumen de contenidos para Kenmore 80412
- Página 1 All manuals and user guides at all-guides.com OPERATING INSTRUCTIONS 80412/90412 ® Before Operating Your Dryer 6. Turn cycle selector clockwise to desired Select the temperature most suitable for each load. setting. The REGULAR-HIGH HEAT, PERM PRESS- Read your dryer Use and Care Guide. It has MEDIUM HEAT, KNITS-MEDIUM-LOW HEAT, and important safety and warranty information.
- Página 2 All manuals and user guides at all-guides.com Timed Dry Cycle Cycle Selection • DAMP DRY - This setting is best for items you (continued) wish to partially dry before hanging or ironing. Select the temperature setting most suitable for This cycle provides up to 80 minutes of drying time at Automatic Dry Cycle the load.
- Página 3 All manuals and user guides at all-guides.com INSTRUCCIONES PARA EL FUNCIONAMIENTO 80412/90412 ® 7. Ponga la secadora en marcha. Gire la perilla de Turn to Antes de poner la secadora en Selección de ciclo Start (Gire para poner en marcha) en el sentido de las funcionamiento agujas del reloj hasta la posición de encendido (ON).
- Página 4 All manuals and user guides at all-guides.com Selección de ciclo Consejos para ahorrar energía (continuación) WRINKLE-RID (ahorra plancha) - Si las prendas secadas no pueden sacarse pronto al final del ciclo, el selector de ciclo REGULAR - Este reglaje es mejor para las prendas de avanzará...