TensCare Mynd Manual Del Usuario página 19

When the battery is low, the central LED
will flash white. This would start about 4
hours before the battery is empty (4 hours
on stand-by).
Warning: Use only the charging
cable supplied. Use of other
chargers could be hazardous
and will negate the warranty.
To charge the battery:
Connect the USB cable to a mobile
phone or tablet charging socket or PC
USB port.
Whilst the battery is charging, the central
LED light will flash white slowly and
repeatedly.
The device will take approximately 2-2.5
hours to charge.
When the battery is fully charged, the
white LED light will stop flashing and
remain turned on.
Note: To minimise the reduction
in battery capacity the device
should be recharged yearly,
regardless of usage.
Note: The device cannot be
used while being charged.
Note: Charging voltage: DC 5V,
charging current: 60mA.
Note:
following specifications.
Output: DC 5 V; 1A
•
Use adapters
18
of the