Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1 2
Extreme hot or cold weather could affect the performance of the built-in sensors that detect body heat. Certain winter
clothing can shield a person's body heat from the sensor during extreme cold weather. During extreme hot weather,
the sensor may not be able to distinguish the difference between normal body temperatures and the surrounding high
temperatures. The sensor will begin working normally once weather conditions return to normal.
PROBLEM
Security light
1. Batteries are defective or depleted.
does not come on
2 Batteries are installed wrong.
3. Battery compartment cover is loose.
4. It is daylight.
5. Movement is taking place outside of the motion sensor detection area.
Light continuosly cycles ON
1. Light sensor is triggered by reflected light from the security light itself.
and OFF (strobe effect).
2. Heat is being reflected from other sources and may be triggering sensor
on and off.
Light turns on during
1. Light may be installed in shadows/dark area.
daylight hours.
1. Sensor may be triggered by a small animal or passing car.
Light comes on for
no apparent reason.
2. Hot air (dryer vent, car exhaust, etc.) may be triggering the sensor.
1. Motion sensor may be picking up a continuous flow of warm air from an air
Light stays on
vent, dryer vent or heat reflecting off a surface.
continuosly.
REPLACEMENT PARTS LIST: Hardware Kit: ZH-SE1289F01-BRS
Care and Maintenance: Periodically clean the fi xture using a mild, non-abrasive glass cleaner and soft cloth. DO NOT use solvents or cleaners containing abrasive agents. Spray liquid
cleaner onto cloth and wipe fixture clean.
Good Earth Lighting
- 3 YEAR LIMITED WARRANTY: The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of (3) years
®
from the date of original purchase by the consumer. The fixture is not warrantied for use in a commercial or retail application. The warranty is limited to use in a residential environ-
ment. We will repair or replace (at our option) the unit in the original color and style if available, or in a similar color and style if the original item has been discontinued, without charge.
Defective units must be properly packed and returned to the manufacturer with a letter of explanation and your original purchase receipt showing date of purchase. Call
1-800-291-8838 to obtain a return authorization number and an address where to ship your defective product. Note: C.O.D. shipments will NOT be accepted. The liability of the
manufacturer is in any case limited to replacement of the defective light fixture product. The manufacturer will not be liable for any other loss, damage, labor costs or injury which is
caused by the product. This limitation upon the liability of the manufacturer includes any loss, damage, labor costs or injury which is (I) to person or property or otherwise; (II) incidental
or consequential in nature; (III) based upon theories of warranty, contract, negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of
the product. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
FCC STATEMENT: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has
been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that of the receiver. 4) Consult the dealer or
an experienced radio/TV technician for help.
FCC responsible party name : Good Earth Lighting, Inc. Address: 1400 E Business Center Drive, STE 108, Mount Prospect IL 60056, USA Telephone number: 1-800-291-8838
Need Help?
Good Earth Lighting
1400 East Business Center Drive, Ste. 108 Mount Prospect, IL 60056
®
Good Earth Lighting
is a registered trademark of Good Earth Lighting, Inc. © 2020 Good Earth Lighting, Inc.
®
Loosen the adjustable
knob to the "open" position
and remove completely to
open the cover and reveal
the battery
compartment.Insert 4 new
alkaline D cell batteries
(not included) into the
battery compartment and
orient them with the "+"
and "-" markings on the
back of the battery
compartment. Once
replaced, place the cover
over opening and tighten
to the "Lock" position
MOTION SENSOR
The light turns on when the motion sensor detects movement. Sensor
detects motion up to 30ft. The 130-degree coverage of the motion sensor is
measured side-to-side. The sensor is more effective side-to-side, rather than
motion coming straight at it (in-and-out). Fixed timer is 20 seconds – lights
will stay on for 20 seconds after motion detection (only during night hours).
TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
Please visit our website at: www.goodearthlighting.com/support or call the Customer Care Center
1-800-291-8838, 8:30 a.m.-5 p.m., CST, Monday-Friday.
BATTERY REPLACEMENT
The red LED low battery indicator inside the motion sensor will light up
when the batteries are low and need replacing. Use ONLY "D"
Alkaline batteries for replacement. (not included)
To replace batteries, loosen the adjustable knob to the "open" position
and remove completely to open the cover and reveal the battery
compartment. Remove batteries. Replace with 4 new alkaline D cell
batteries (not included) into the battery compartment and orient them
with the "+" and "-" markings on the back of the battery compartment.
Once replaced, place the cover over opening and tighten to the "Lock"
position
CORRECTIVE ACTION
1. Replace the batteries.
2. Reinstall the batteries correctly.
3. Check battery compartment cover to ensure it is closed and secured with the screw.
4. Light is operating as it was designed. Recheck at night or move fixture to a darker area.
5. Move fixture within the desired detection area.
1. Change the position of the light heads, aiming light away from the reflecting surfaces.
2. Remove heat source from detection zone or move fixture to new location.
1. Light is operating as it was designed.
1. Light is operating as it was designed.
2. Remove heat source from detection zone or move fixture to new location.
1. Remove heat source from detection zone or move fixture to new location.
Do not mix old and
new batteries. Cold
weather may have a
negative impact on
battery life
130°
2
Printed in China
Tabla de contenido
