Additional Safety Instructions - Asist AE3M30SDS-BMC Guia Del Usuario

ADDITIONAL SAFETY INSTRUCTIONS

Please read these safety instructions before use and
keep them in a safe place.
! - This symbol indicates the risk of injury or damage
to the device.
! Failure to follow the instructions in this manual may
result in injury.
! The electric grinder complies with the applicable
technical regulations and standards.
! Observe the relevant regulations when sanding
painted surfaces.
! Whenever possible, use a vacuum cleaner to remove
dust.
! Dispose of dust and other waste in an environmentally
friendly manner.
! Be especially careful when sanding lead-containing
paints.
! All persons entering the work area must wear a
special protective mask against smoke and dust from
lead-containing paints.
! Children and pregnant women are prohibited from
entering such a work area.
! It is forbidden to use the grinder to grind objects made
of magnesium.
! Make sure that the material is properly supported or
fastened.
! Wear eye protection and a dust mask when working.
! Check the tool before starting work. Never work with
damaged tools.
! Only switch on the tool if you hold it firmly in your
hands.
! Hold the tool firmly with both hands when working.
! The tool is always in working order - prevent it from
being accidentally started.
! Never leave the tool switched on during work breaks.
! Do not touch moving parts of the tool. Route the
power cord of the tool from the rear, out of the reach of
moving parts of the tool.
! Use caution when sanding surfaces under which live
power lines are stored.
! The tool vibrates during use. Vibration of the tool may
cause the screws to loosen. Therefore, always check
all screws on the tool for tightness before starting work.
Notice:
! Use the tool only for dry grinding / cutting / separating.
Water entering the tool increases the risk of electric
shock.
! Make sure that no one is exposed to the risk of sparks.
Remove all flammable materials from the area. Sparks
are generated when grinding metallic materials.
! Warning, risk of fire! Avoid overheating the ground
object and the grinder.
! Always empty the dust container before the break.
Under adverse conditions, such as sparks from
brushed metal, ground debris in a dust container,
microfilter or paper bag (or in a filter bag or vacuum
cleaner filter) may ignite on its own. Especially when
mixed with residues of paint, polyurethane or other
chemical materials, and when the ground fragments
are hot after a long period of work.
! When working, always hold the tool firmly with both
hands and maintain a safe posture. The power tool is
always safer with both hands.
! Secure the workpiece. The workpiece, which is
clamped by means of a clamping device or vice, is
always secured more securely than by hand.
! Keep the workplace clean. Mixtures of materials in
particular are dangerous. Light alloy dust may start to
burn or explode.
! Never use the tool with a damaged power cord. If the
power cord is damaged during operation, do not touch
it and unplug it from the electrical outlet. Damaged
power cords increase the risk of electric shock.
! Wear protective gloves when changing the tool on the
machine. The tools become hot during prolonged use.
! Keep your hands away from electrical cables and
pipes in the saw blade area. Do not hold the underside
of the workpiece. Contact with the saw blade can
cause injuries.
! Use a suitable detector or contact your local utility to
locate hidden service supply cables / piping. Contact
with electrical cables may result in fire or electric shock.
Damage to the gas line can lead to an explosion.
Breaking the water pipe can lead to property damage
or electric shock.
! If you use the device outdoors, always connect it
to a residual current device with a maximum tripping
current of 30 mA. When using an extension cord,
always use one that is approved for outdoor use.
! Toxic fumes! Any harmful / toxic dust generated
during grinding poses a health risk to the person
operating the device and anyone near the work area.
! Ensure adequate ventilation when working with
plastics, paint, varnish, etc.
! Do not immerse materials or the surface you will be
working on liquids containing solvents.
- Use protective equipment against noise, dust and
vibration !!!
SAVE THESE SAFETY INSTRUCTIONS !!!
DESCRIPTION
Your multifunctional tool is designed for cutting and
separating wooden materials, plastics, gypsum, non-
ferrous metals and fasteners (eg unhardened nails,
staples). It is also suitable for working on wall panels
made of soft materials and also for dry sanding. It is
especially suitable for work close to the edges and
trimming.
1 - On / off switch
2 - Cable
3 - Tool carrier
4 - Clamping screw with washer
5 - Plunge saw blade
6 - Sandpaper
7 - Abrasive pad
8 - Scraper
9 - Hex key
10 - Segment saw blade
11 - Suitcase
12 - Light
48