Installation And Connection To Dvr; Installation - Sanyo VA-EXD1B Manual De Instrucciones

e00_l8hcc_us_7.book Page 6 Monday, March 14, 2005 3:58 PM
1

INSTALLATION AND CONNECTION TO DVR

Installation

Call a specialist to install the unit. (Do not try
to install the unit yourself.)
Use the following procedures to attach the external disc unit to
the DVR.
Docking the unit with the DVR is useful.
The external disc unit and the DVR must be off before
commencing the following procedures.
Preparing the external disc unit
1
Remove the four screws from the top of
the external disc unit, and remove the
cover.
Do not lose the four screws as they will be used later.
2
Use two screws (accessory) to attach
the fitting (accessory) to the external
disc unit.
Tightening torque: 0.6 N•m - 0.7 N•m
All manuals and user guides at all-guides.com
Screw
Fitting
6
Preparing the DVR
3
Turn the DVR upside down, and use a
screwdriver to remove the leg (A).
4
Remove the four screws from the sides
of the DVR, and remove the cover.
If the HDD is mounted in the slave position, remove the
HDD block.
Front panel side
(A)
Slave
position
English