Idiomas disponibles
Idiomas disponibles
π
H-3542
RUBBERMAID
®
AIR FRESHENER DISPENSER
TOOLS NEEDED
Phillips Screwdriver
Wall Anchor x 2
Position dispenser where moving air will disperse
fragrance and neutralizer throughout the entire area,
approximately 3-6' from entrance. Recommended
mounting height is 6' from the floor.
NOTE: This product is designed for commercial
restrooms and is effective in areas approximately
20 x 30' with a ceiling height of 10' (1-4 stall
restrooms, up to 6,000 cubic feet).
MOUNTING WITH ADHESIVE STRIP
1.
Peel one side of adhesive strip and adhere to the
rear side of the dispenser. (See Figure 1)
2. Peel other side of adhesive strip and adhere to wall
at desired location. (See Figure 1)
MOUNTING WITH SCREWS
1.
Unlock dispenser cover by inserting prongs of key
into two white square holes in bottom of dispenser.
(See Figure 2)
2. Hold the opened dispenser to the wall and mark
screw holes with a pen or pencil. Only mark top
portion of the top hole. (See Figure 3a)
3. Using a 3mm drill bit, drill holes into wall at marked
locations. (See Figure 3b)
PAGE 1 OF 6
CONTINUOUS
Drill
3 or 6mm Drill Bit
(Depends on mounting method)
Screw x 2
1-800-295-5510
uline.com
Hammer
PARTS
Dispenser x 1
MOUNTING
Figure 1
Figure 2
Figure 3
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Dispenser Key x 1
2
3
2
1
Figure 3a
Figure 3b
1014 IH-3542
Tabla de contenido
Manuales relacionados para Uline RUBBERMAID H-3542
Resumen de contenidos para Uline RUBBERMAID H-3542
- Página 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. π H-3542 1-800-295-5510 uline.com RUBBERMAID CONTINUOUS ® AIR FRESHENER DISPENSER TOOLS NEEDED Drill 3 or 6mm Drill Bit Hammer Phillips Screwdriver (Depends on mounting method) PARTS Wall Anchor x 2...
- Página 2 (See Figure 8) 4. Insert refill into dispenser and close cover. (See Figure 9) π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA 1-800-295-5510 uline.com PAGE 2 OF 6 1014 IH-3542...
-
Página 3: Herramientas Necesarias
π H-3542 800-295-5510 uline.mx RUBBERMAID ® DESPACHADOR DE AROMATIZANTE CONTINUO HERRAMIENTAS NECESARIAS Taladro Broca de Taladro de 3 o 6 mm Martillo Desarmador Phillips (Depende del método de montaje) PARTES 2 Anclajes de Pared 2 Tornillos 1 Despachador 1 Llave de Despachador... -
Página 4: Continuación De Montaje
3. Coloque la jaula en la base empujando y girando, eliminando el espacio ocupado anteriormente por la tira. (Ver Diagrama 8) π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA 800-295-5510 uline.mx PAGE 4 OF 6 1014 IH-3542... -
Página 5: Outils Requis
π H-3542 1-800-295-5510 uline.ca RUBBERMAID – DISTRIBUTEUR D'ASSAINISSEUR D'AIR EN CONTINU OUTILS REQUIS Perceuse Mèche de perceuse de 3 ou 6 mm Marteau Tournevis cruciforme (En fonction de la méthode d’installation) PIÈCES Dispositif d’ancrage x 2 Vis x 2 Distributeur x 1 Clé... - Página 6 (Voir Figure 8) π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA 1-800-295-5510 PAGE 6 OF 6 uline.ca 1014 IH-3542...