IMPORTANT
Before You Begin Register This Product.
For future reference, record the model name, model number, date of manufacture and purchase date of this
product. You can find this information on the product.
____________________________
Model Name
____________________________
Model Number
____________________________
Date of Manufacture
____________________________
Date of Purchase
OWNER / USER RESPONSIBILITY
DO NOT OPERATE OR REPAIR THIS PRODUCT WITHOUT READING THIS MANUAL.
Read and follow the safety instructions. Keep Instructions readily available for operators. Make certain all
operators are properly trained and understand how to safely and correctly operate the product. By proceeding
you agree that you fully understand and comprehend the full contents of this manual. Failure to operate this
product as intended may cause injury or death. The manufacturer is not responsible for any damages or injury
caused by improper use or neglect. Allow product operation only with all parts in place and operating safely.
Use only genuine replacement parts. Service and maintain the product only with authorized or approved
replacement parts; negligence will make the product unsafe for use and will void the warranty. Carefully
inspect the product on a regular basis and perform all maintenance as required. Store these instructions
in a protected dry location. Keep all decals on the product clean and visible. Do not modify and/or use for
any application other than that for which this product was designed. If you have any questions relative to a
particular application, DO NOT use the product until you have first contacted the distributor or manufacturer to
determine if it can or should be performed on the product.
For technical questions please call 1-888-448-6746.
INTENDED USE
Screw jacks lift and precisely position a variety of loads. Upright or inverted, these jacks operate at full
capacity in tension or compression. Mechanical jacks offer increased precision and travel speed required
to level or lift loads needing rigorous detail or load stabilization. Use this jack on house leveling, bridge
stabilization, machinery, oil field maintenance or steel fabrication and construction. Can also be used as
an external locking device to hold position. Multi-axis, cleated saddle positions accommodate and assist in
leveling the load. This product is tested for reliability and safety to meet ASME B30.1 Standards.
TECHNICAL SPECIFICATIONS
Item
Capacity
SJ05
5 TON
SJ10
10 TON
SJ15
15 TON
SJ20
20 TON
SJ25
25 TON
All manuals and user guides at all-guides.com
Bar Hole
Min.
Size
Height
9/16 inch
9-1/2 inch
11/16 inch
11-1/2 inch
13/16 inch
14 inch
1 inch
15-13/16 inch
1 inch
16-3/4 inch
2
Lifting
Max.
Range
Height
3-7/8 inch
13-3/8 inch
6-5/16 inch
17-13/16 inch
7-7/16 inch
21-7/8 inch
9-1/16 inch
24-7/8 inch
9-3/4 inch
25-1/2 inch
Net
Weight
9.25 lbs.
16 lbs.
23.13 lbs.
34 lbs.
40.31 lbs.