Tabla de contenido
In the event that it does not switch on after pressing
the On/Off button or having changed the batteries,
take the appliance to your Authorised Technical
Support Centre.
Cleaning
- Clean the equipment with a damp cloth with a few
drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
It is advisable to clean the armband after every 200
uses approximately
Anomalies and repair
- Take the appliance to an authorised technical
support service if problems arise. Do not try to
dismantle or repair without assistance, as this may
be dangerous.
Specifications:
- Appliance with an internal power supply (batteries)
Tensio Precise PLUS 4 ×1.5V LR6 (AA)/ Tensio
2*1,5 LR3(AAA)
Alkaline batteries last for approximately 500 uses.
- Inflation: Automatic
- Deflation: Automatic
Armband size (Tensio Precise Plus): 22-36 cm
Pressure measurement method: Oscillometer
- Measurement range:
Pressure of wristband: 0-280 mmHg
Systolic pressure:
Diastolic pressure:
- Measurement range (Pulse): 40-180 beats/minute
- Precision: +/- 3mmHg
- Weight: Tensio Precise Plus 542 g approx (exclu-
ding batteries, not included)/ Tensio 180 g approx
(excluding batteries, not included)
Operating temperature: 5ºC-40ºC. RH less than 90%
Storage temperature: -20ºC-55ºC. RH less than 95%
Note: These specifications are subject to change
without notice of purpose of improvement.
For EU product versions and/or in the case that it is
requested in your country:
Ecology and recyclability of the product
The materials used to make the packaging of this
appliance are covered by a system for collecting,
classifying and recycling them. Should you wish to
dispose of them, use the appropriate public contai-
ners for each type of material.
The product does not contain concentrations of
Manual Tensios.indb 14
60-260mmHg
40-199mmHg
substances that could be considered harmful to the
environment
This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorised
waste agent for the selective collection of
waste electrical and electronic equipment
(WEEE)
Symbol for "batch code"
- This symbol signifies that the instructions must
be read
- This symbol indicates that the part which applies
is BF.
- Manufacturer
- Year of production
- Representative in Europe
0123Symbol for "CE"
IP21 Symbol for "Against ingress of solid foreign
objects: ≥ 12.5mm diameter; Against ingress of water
with harmful effects: vertical dripping" (MOD. Tensio
Precise Plus
IP22 Symbol for "Against ingress of solid foreign
objects: ≥ 12.5mm diameter "Protect against dripping
water when ttited up to 15º (MOD Tensio)
- So as to avoid inaccuracies in the measurements
taken due to electro-magnetic interference between
electronic devices, do not use this appliance near
other devices such as mobile telephones or electro-
magnetic appliances. It is advisable to keep it at
2/12/15 12:43
Tabla de contenido
