Technical Data - Poulan Pro PRHT22i Manual Del Usuario

LED screen
LED 1 is red and LED 2 is
green, battery pack does not
charge or operate correctly in
product
RED LED comes on, LED 2
is green and flashes during
charging or when the battery
pack is in the battery charger
RED LED flashes and LED 2
flashes green when the bat-
tery pack is installed.
Motor specifications
Motor type
Motor voltage
Motor power
Battery and charger specifications
Default battery pack type
Default battery charger type
Blade specifications
Blade speed (standard / boost)
Blade length
Cutting capacity
Product dimensions
Weight (without battery)
398 - 002 - 20.11.2017
All manuals and user guides at all-guides.com
Possible faults Possible steps
Battery pack failure Remove battery pack from the product. Do not charge.
Battery pack is damaged and must be replaced. Speak to
an approved service center.
Internal battery tempa- Move the battery charger and battery pack to a location
ture is too low or too where the internal temperature of the battery pack can be
high for charging between 5°C (41°F) and 45°C (113°F).
Internal battery tempera- The internal temperature in the battery must be between
ture is too low or too -15°C (5°F) and 70°C (158°F). The environment tempera-
high ture in the battery pack is too low or too high.
•
•

TECHNICAL DATA

unit
V (DC)
W
1
min
cm (in)
mm (in)
kg (lb)
If the battery pack is too cold from the ambient envi-
ronment, move the battery pack and battery charger to
a warm environment.
If the battery pack is too hot, especially after operation,
move the battery pack and battery charger away from
the hot environment.
PRHT22i (BHT58VPR)
Brushless
58
500
PR140Li
PR275Ci
1400 / 1900
55 (21.6)
19 (0.75)
3.66 (8.1)
9