Common Problems - Craftmade IM52 Instrucciones De Instalación

Operation Instructions
Controls fan motor speed. To select desired speed,
press button once and release
Controls direction of fan blades. To reverse
fan blades, press once and release.
Turns fan motor speed off. Press once to
turn off. To start motor speed again, hit
one of the motor speed buttons.
Controls the on/off and intensity for side
body lighting. Push and release for on/off
function. Hold down for full range light
dimming.
Controls the on/off and intensity for the
integrated bottom light kit. Push and
release for on/off function. Hold down
for full range light dimming.

Common Problems

Fan Will not Start
1. Check fuse or circuit breaker and replace if necessary
2. Turn off electrical power and check all wire connectors.
3. Check on/off TCS and wall control selector switch. See operation
instructions.
Fan is Excessively Noisy
1. Check that all screws in fan assembly are tight and properly seated.
2. Check to make sure mounting bracket is installed properly.
3. Check to make sure light kit and glass reinstalled properly and tight.
4. If wall control is used, insure the wall control is not a transformer or a
variable speed type.
Fan Wobbles
1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are screwed firmly into motor.
3. Check the weight of blades. All our blades are weighed on electronic scales.
The weight is marked on the reverse side of the fan blade near the motor
end. All of the blades should be the same weight to prevent fan from
wobbling.
4. A balancing kit is enclosed if needed.
The weight of the complete fan, including assembly hardware is 23.8 lbs.
All manuals and user guides at all-guides.com
Instrucciones de instalación
Modelo: IM52
Ventiladores de
Impulse
IM52
MEJOR DISEÑO
®