Tabla de contenido
Idiomas disponibles
Idiomas disponibles
tion
tant: When using an existing outlet box, be sure the box is securely attached
building structure and can support the full weight of the fan. Failure to do
result in serious injury or death.
Step 1
circuit breakers and wall switch to the fan
ne leads.
ning: Failure to disconnect power supply prior to
lation may result in serious injury or death.To reduce
sk of shock, this fan must be installed with an
ing wall control/switch.
Step 2
ne mounting method to use.
nrod Mount
e Mount
made Part #45AD (see dealer)
ANT: If using the angle mount
heck to make sure the ceiling angle
per than 35°. Angles greater than
quire a 45° angle adapter.
Step 3
make sure blades are at
rom any obstruction.
wnrod length to
des are at least
he floor.
(2.1m)
Min.
All manuals and user guides at all-guides.com
Downrod Installation
(Normal Ceilings)
Downrod Installation
(Vaulted Ceilings)
30"
0.75m
Min.
84"
4
Prior to securing mounting bracket, screw "J" hook (S7) into ceiling outlet
box as a secondary support means. Secure mounting bracket (#1) to the
outlet box (A) by tightening bracket screws & washers (S3) as shown. If
not mounting to an outlet box, use wood screws (S1) and washers (S3) and
mount securely to ceiling beam. Be sure at this point to insert canopy
screws (S2) in bracket.
NOTE: Do not mount directly to sheet rock or ceiling tile.
NOTE: J Hook installation is a Canadian requirement only.
"J" Hook (S7)
Ceiling
Bracket Screws
& Washers (S3)
Wood Screws (S1)
Canopy Screws (S2)
5
Step 5
Locate downrod assembly
(2). Loosen ball screw on
black hanging ball to free
lock pin. Black hanging
ball will slide down.
Remove ground screw and
green ground wire.
Remove hanging ball from
downrod and save all
parts. Insert fan wires
through downrod. Screw
downrod into top of fan
motor housing, being
careful that wires are
pulled through.
Step 4
Support Beam
Outlet Box (A)
OUTLET BOX
Mounting Bracket (1)
Wood Screws (S1)
Lock Pin
Green Ground
Wire
Ball Screw
Downrod
Assembly
Hanging Ball
(#2)
Downrod
Fan Motor Housing
Tabla de contenido
