Craftmade IM52 Instrucciones De Instalación página 4

Step 6
wnrod so the hole in the downrod aligns with the hole in the
the motor. Insert safety bolt (S6) through coupling and downrod
nut. Tighten firmly. Tighten set screw "A" against downrod.
otor housing (4) over downrod assembly. Place canopy (3) over
2). Attach black antenna wire plug from top motor housing to
na wire plug on motor housing. Next attach the blue and white
rom top motor housing to the blue and white plug from the
ing. Make sure connections are fully snapped together. Replace
ll, insert hanging pin through downrod and tighten set screw
ging ball into downrod.
Threaded
et Screw Hole
Ground
Wire
Ball
Screw
Safety Bolt & Nut (S6)
Blue & White Wires
Fan Motor Housing (5)
NING: Failure to completely tighten downrod as described in steps 5 &
ve could result in the fan loosening and possibly falling. IMPORTANT:
antenna wire must be connected for fan to function.
All manuals and user guides at all-guides.com
Set Screw (C)
Downrod (2)
Canopy (3)
Top Motor Housing (4)
Set Screw (A)
Black Antenna Wire
7
For added security, attach safety cable from fan unit to "J" hook (S7) in
outlet box. Secure by looping zip tie (S8) through safety cable and "J" hook.
Tighten zip tie securely. Lift fan onto the mounting bracket (#1). Turn
housing until hanging ball seats itself into ball socket (listen for click).
Green Ground Wire
NOTE: Parts furnished will allow
you to install your fan at up to a 35°
angle. Angles greater than 35° will
require a 45° angle adapter (see
dealer).
NOTE: J Hook installation is a
Canadian requirement only.
WARNING: To reduce the risk of fire, electric shock or personal injury, mount
so outlet box marked "acceptable for fan support" and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support
of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
Step 7
Support Beam
"J" Hook (S7)
Outlet Box (A)
OUTLET BOX
Ceiling
Mounting Bracket (#1)
"J" Hook (S7)
Zip Tie (S8)
Safety Cable