How To Use The Remote Control; Loading Batteries; Effective Range Of Remote Control Unit - JVC DLA-RS15 Manual De Instrucciones

Proyector d-ila
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

How to Use the Remote control

Loading Batteries

1
If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out.
When this happens, replace the batteries. Insert the batteries according to the
Be sure to insert the
end first.
If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again
and operate the remote control.

Effective Range of Remote Control Unit

When directing the remote control
toward this unit
When aiming the remote control towards the
remote sensor on this unit, ensure that the
distance to the sensor in front or at the rear of
this unit is within 7 m.
If the remote control fails to work properly,
move closer to this unit.
When reflecting off a screen
Ensure that the total of distance A between
this unit and screen and distance B between
remote control and screen is within 7 m.
As the efficiency of signals reflected from the
remote control unit differ with the type of
screen used, operable distance may decrease.
2
This unit
Screen
ENGLISH
3
marks.
30°
20°
20°
30°
30°
20°
A
20°
B
Remote control
30°
Remote control
This unit
15
Tabla de contenido

Solución de problemas

loading

Tabla de contenido