Cleaning And Maintenance; End Of Season Storage; Troubleshooting - Pur Line RAFY 75 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

CLEANING AND MAINTENANCE

· Unplug the appliance before cleaning.
· Empty water tank to avoid odor occurring when not in use.
· After few days operation, dust and dirt may reserve in water tank. It is recommended to change
water and clean water tank frequently.
· After long time operation, the filtration mesh becomes clogged with dust and dirt, which will
greatly affect the unit's performance. It is recommended to clean the filtration mesh frequently.
· Use a soft cloth to clean the appliance. Do not use solvents or harsh chemicals. Never use direct
water. Do not allow water to come in contact with the control panel.
· Do not clean with metal sourcing pads. It may scratch the surface or cause electrical shock.
FILTER
Use a soft brush, and if necessary some water and mild detergent.
When everything is dry, place each filter in corresponding position.
OUTER CASING
The surface of the appliance can be cleaned using wet cloth but do no rinse directly with water.

END OF SEASON STORAGE

Switch off and unplug the unit.
Clean or change the filter.
Turn on the unit for a while, so the inside can dry out completely.
It is recommended to store the unit in it's original carton. Do not stack heavy objects on top of the
unit.

TROUBLESHOOTING

Problem
No air blows out
The unit can not be
turned off
Too noise
No humidifying
No swing
Cause
1. No power
2. No operation
3. Some parts are damaged
1. "POWER" button on the top cover is
not pressed
2. Some parts are damaged
1. Foreign objects are inside the unit
2. Motor is out of order
3. Air wheel is loose
1. Lack of water
2. Pump is out of order
3. Water pipe drops off
Swing motor is out of order
EN
Solution
1. Connect the main lead in the right way
2. Press "POWER" button
3. Send the unit to authorized service agency
1. Press "POWER" button on the top cover.
2. Send the unit to authorized service agency
1.Take off the back shell and filtering net then
take out the objects
2 & 3. Send the unit to authorized service
agency
1. Add water.
2 & 3. Send the unit to authorized service
agency
1. Send the unit to authorized service agency
11
Tabla de contenido
loading

Tabla de contenido