Self-Cleaning Function - Mellerware Mixy! Manual De Instrucciones

Clean the equipment with a damp
–
cloth with a few drops of washing-
up liquid and then dry.
Do not use solvents, or products
–
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Do not let water or any other liquid
–
get into the air vents to avoid
damage to the inner parts of
the appliance.
Never submerge the appliance in
–
water or any other liquid or place it
under running water.
During the cleaning process, take
–
special care with the blades, as
they are very sharp.
If the appliance is not in good
–
condition of cleanliness, its surface
the duration of the appliance's
useful life and could become
unsafe to use.
The following pieces may be
–
washed in a dishwasher (using a
soft cleaning program):
- Jug.
- Cup.
- Lid.
Then dry all parts before its
–
assembly and storage.

SELF-CLEANING FUNCTION

Put water and a small amount of –
washing up liquid in the jar.
Select the function "turbo".
–
REMOVABLE BLADES FOR
EFFECTIVE CLEANING
Disconnect the appliance from the
–
mains and allow it to cool before
undertaking any cleaning task.
Loosen the jar base by turning it in
–
counterclockwise direction. (Fig.3).
Remove the blade set, sealing
–
blade ring and jar base and clean
them. (Fig.4).
After cleaning, replace the blade
–
opposite direction (Fig.5).
Anomalies and repair
Take the appliance to an
authorised technical support
service if product is damaged
or other problems arise. Do not
attempt to disassemble or repair
the appliance yourself as this may
be dangerous.
For EU product versions
and/or in case that it
is requested in your
country:
ECOLOGY AND RECYCLABILITY OF
THE PRODUCT
The materials of which the
–
packaging of this appliance
consists are included in a
recycling system. Should you
wish to dispose of them, use the
appropriate public recycling bins
for each type of material.
EN