Computer Setup - Ovislink FSH16W Guía Rápida De Instalación

Computer setup:

Configure the IP adress of the computer with 192.168.2.2. To do it, please, follow the following steps.
1. If you use Windows 2000/XP , open the Configuration Panel and then the Network Connections.
2. Right click on the Local Network Connection and choose Properties.
3. Click twice on Internet Protocol TCP/IP.
4. Select Specify an IP Address :
- IP Address : 192.168.2.2
- Subnet Mask : 255.255.255.0
7. Click on OK.
8. Click on Close.
Login Window :
1. The default IP address of the FSH16W or FSH24W is 192.168.2.1. Please, open your favorite web browser
and tape :
2. The login windows will appear. The
Password is system. Enter them in the login windows and
click on OK.
3. The website allow you to configure the following features :
- Administrator :
That allows you to configure the authentication (login) and
the IP address of the switch, to see the status and to do
a Reset and a Firmware update.
- Port Management :
That allows you to configure each port (Speed, FDX, Bandwith...), to specify a Port Mirroring and to enable the
Broadcast Storm Control feature.
- VLAN Setting :
That allows you to separate the physical network (the switch) in several logicals subnet (each port or a port
group). It's a way to secure the LAN communication defining VLAN groups. Each port in a group can
communicate with the others. But, each group can't communicate with the others. Some shared resources can
be define to give to each VLAN group an internet access or an access to a network printer, server, ...
- Trunk Setting :
That allows you to configure an high-speed communication link between two switches. In fact, this feature use
until 4 ports to create an "highway" to another switch. So, you can obtain a bandwith until 400/800 Mbps
(Half/Full-Duplex).
- QoS Setting :
That allows to configure the Priority and the Class of Service to improve the datas transfert.
- MAC Address :
That allows to configure the MAC table. So, you can control the LAN communication into the switch. For
example, you can forbid to a computer to communicate on your LAN by disabling the MAC Address Learning
fonction of the switch.
2
All manuals and user guides at all-guides.com
http://192.168.2.1
ID is admin, and the