Tabla de contenido
Idiomas disponibles
Idiomas disponibles
16 & 24 Ports RJ-45 10/100 Mbps Web-Management Switch
USER´S MANUAL:
OvisLink Corporation, thank you the loyalty you have shown in our company, for sure the performance and the
quality of our devices will satify your demands.
PACKAGING CONTENTS:
Before proceed with the installation procedure, please make sure you have received all the next elements:
- 1 FSH16W or FSH24W Fast Ethernet Switch.
- 2 Supporting frame
- 4 rubber padding
- This user's manual
- 1 power cable
If any element is remaining, please contact with your distributor.
QUICK INSTALLATION GUIDE:
Location of the Switch.
Choose a proper place such as desk platform for the rack mountable switch, considering the surrounding such as
power requirements, space, keep it away from sunlight, heat source, and electromagnetism interference
area. The wind range must be at least 10 cm for a good ventilation.
Installation & Connection method:
1. Stick the rubber padding to the rear side of the switch.
2. Use standard EIA19' rack mount and fix the EL rack on both sides of the switch.
3. Adjust the holes so that they can fit and fasten the switch with the turnbuckle.
4. Plug the cable into the switch socket, turn the power on, the switch will test itself, all indicators and lights are on
at the same time, after 2 seconds the lights automatically turn off and test is done.
5. Put one end of the cable into a RJ45 port of the switch, the other end is connected with the NIC card and
router. Cat. 3,4.5 cables can be used, Cat. 5 is recommendable. If the power of the switch is on, the related
indicators are on. Every port of the switch can be used as Uplink port.
Note: Don't plug the phone line into RJ45 port, otherwise it will damage the unit.
6. The switch can adjust the power automatically depending on the input voltage within the marked voltage on the
rearboard.
LED INDICATORS:
LED
Estado
POWER
ON/OFF
LINK
ON/OFF
FLASH
SPD.
ON/OFF
All manuals and user guides at all-guides.com
Indications
Power on/ off
Ports connected / Ports unconnected
Data frames are through
The transmission rate among ports is 100Mbps.the
transmision rate is 10Mbps.
1
Tabla de contenido
