Intex ZX300 Deluxe Automatic Manual Del Propietário página 6

(178IO) ZX300 DELUXE AUTOMATIC POOL CLEANER ENGLISH SIZE: 4.875" X 7.25" PANTONE 295U 08/21/2020
SETUP INSTRUCTIONS (continued)
Before setup, make sure that:
• The filter pump is turned off, and disconnect the power cord from
the electrical outlet.
• The pool is free from objects that will hinder the auto cleaner free
movements by removing the ladder, surface skimmer, water sprayer
(if applicable), floats or any other objects from the pool.
• The pool wall or floor are free from algae. Algae will cause the
wheels to slip and hinder the auto cleaner movement. see your
local pool supply specialist for algae treatment solutions.
1. from inside of the pool, unscrew the nozzle from the water return
connector. see fig. 1.
NOTE: The device operates from the pressure side of the pool
water return connector (water flowing back from the filter pump to
the pool).
2. Make sure the micro-screen (6) is inside the pressure release
valve (7), then screw the pressure release valve set to the threaded
strainer connector, from inside of the pool. see fig. 2.
S AVE THESE INSTRUCTIONS
Threaded
strainer
connector
Threaded
strainer
connector
7
Page 6
178A
1
nozzle
2
7
6