Debris Net Cleaning - Intex ZX300 Deluxe Automatic Manual Del Propietário

Ocultar thumbs Ver también para ZX300 Deluxe Automatic:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
(178IO) ZX300 DELUXE AUTOMATIC POOL CLEANER ENGLISH SIZE: 4.875" X 7.25" PANTONE 295U 08/21/2020
SETUP INSTRUCTIONS (continued)
IMPORTANT NOTE
if the auto cleaner starts to stir the debris, sediments on the pool
floor, you will require to clean or replace the filter cartridge more
frequently as the fine sediments are retained by the cartridge. Also
clean the debris net (3) and micro-screen (6) frequently.
1.
Make sure the filter pump is turned
off, and disconnect the power cord
from the electrical outlet.
2.
lift the auto cleaner's hose slowly
then grasps the auto cleaner handle.
see fig. 10-11.
CAUTION: Do not pull the hose
directly which could damage the
auto cleaner hose connection fitting.
3.
slowly lift up the auto cleaner from
the water. Once all the water has
been released from the auto cleaner,
remove the auto cleaner from the
pool and place it on the ground.
see fig.12.
S AVE THESE INSTRUCTIONS

DEBRIS NET CLEANING

Page 11
178A
10
11
12
Tabla de contenido
loading

Tabla de contenido