Medela BabyWeigh Manual De Instrucciones

BabyWeigh
COMPONENTS
1. Baby Basket 8. g/lb • oz Switch
2. Fixing Screw 9. Basket Release Lever
3. Plate 10. AC Adapter Input
4. Scale Housing 11. AC Adapter
5. Level Gauge 12. Battery Compartment
6. Adjustable Foot 13. Battery Compartment Cover
7. Display Panel
Medela, Inc., P.O. Box 660, 1101 Corporate Drive, McHenry, IL 60051-0660
Phone: 800-435-8316 Fax: 815-363-1246
Email: [email protected]
Medela is a registered trademark and BabyWeigh is a trademark of Medela, Inc.
1948193 B 0109 ©2009 Medela, Inc.
Scale Parts
™
All manuals and user guides at all-guides.com
www.medela.com
BabyWeigh Scale
™
Quickstart Instructions for Test-Weight/Measuring Breastmilk Intake
See Medela's assembly, use and service manual for detailed scale information.
WARNING: Do not leave baby unattended. A fall from the scale could cause serious injury.
Prior to Before and After Weights
Considerations to follow prior to test-weighing:
• Do Not change diaper between baby's before and after weights.
• Baby should wear the same clothing for before and after weights.
• Use bib during feeding. Remove bib prior to weights.
Note – Test-weights are always made using grams as the unit of measure because milk intake measured in grams is closely
equivalent to milliliters (ml) or cubic centimeters (cc).
Instructions for Weighing
Before Weight Instructions:
1. Make sure the scale is level on flat surface (see level gauge).
2. Press the On/Zero button, wait until '0' appears, and verify 'g' for grams is indicated by the arrow on
digital display.
3. Place baby on the scale, holding one hand just above baby.
4. Wait for beep. Digital display reads LOCK.
5. The value that appears on digital display is the before weight.
6. Press the WEIGHT ENTRY button while the before weight is displayed. MEMORY WEIGHT appears
on display.
7. Remove baby from the scale and record before weight. Scale must remain on while feeding.
After Weight Instructions:
1. After feeding press the ON/ZERO button. Wait until a "0" appears on display.
2. Place baby on scale, holding one hand just above baby.
3. Wait for beep. Display reads LOCK.
4. The value that appears on digital display is the after weight.
5. Remove baby from the scale.
6. Press and hold the WEIGHT ENTRY button. Scale will calculate milk intake (ml or cc). The calculated
milk intake appears on digital display until you release the button.
7. Release the WEIGHT GAIN button. The after weight reappears on digital display.
8. Record the after weight and calculated milk intake.