Continuity Test - LIMIT 21 Manual Del Usuario

English

Continuity test

(See fig 2)
To test for continuity, connect as follows:
1. Insert red test lead into the HzDuty%VΩ terminal and black test lead into the
COM terminal.
2. Set the rotary switch to continuity position.
3. Push select button to select continuity function. Displays shows continuity
symbol.
4. Connect the test leads across with the object being measured. The buzzer
sounds if the resistance of a circuit under test is less than 50Ω.
Replacing the Battery
(See figure 4)
Replace battery as soon battery symbol is shown on display.
1. Disconnect the connection between the testing leads and the circuit under test
when battery indicator appears on the display.
2. Turn the Meter to OFF position.
3. Remove the screw, and separate the battery lid.
4. Replace the battery with 1 pcs 9 V Type 6F22.
5. Rejoin the battery lid and the screw.
14