Continuity Test - LIMIT UT207 Manual De Instrucciones

Continuity test

To test for continuity, connect as follows:
1. Insert red test lead into the VΩHz terminal and black test lead into the COM
terminal.
2. Set the rotary switch to continuity position.
3. Push select button to select continuity function. Displays shows continuity
symbol.
4. Connect the test leads across with the object being measured. The buzzer
sounds if the resistance of a circuit under test is between 30Ω.and 100Ω.
Replacing the Battery
Replace battery as soon battery symbol is shown on display.
1. Disconnect the connection between the testing leads and the circuit under test
when battery indicator appears on the display.
2. Turn the Meter to OFF position.
3. Remove the screw, and separate the battery lid.
4. Replace the battery with 1 pcs 9 V Type 6F22.
5. Rejoin the battery lid and the screw.
(See fig 2)
(See figure 4)
15
English