Technical Specifications - Cilio AIDA Manual De Instrucciones

Decalcifying
Attention! To ensure the safe function of the coffee maker, the coffee maker must be descaled on a regular
basis. The intervals depend on the intensity of use and the lime content in the water. Check the coffee maker,
especially the safety valve, for limescale residues before each use.
1. Start as in " Thorough cleaning".
2. Model-based, the safety valve is equipped with a movable pin. Pull the pin forward from the outside to the
resistance and release the pin. By the rebound of the pin, the calcifications in the safety valve are loosened.
3. Fill the lower part of the coffee maker to the edge with a solution of citric acid or vinegar. For heavy calcification,
use commercially available descaling agent according to the instructions given there.
Attention! It is important that especially the safety valve has contact with the solution or the descaling agent.
4. Insert the funnel into the lower part so that it is also descaled.
5. Remove the sieve from the upper part and place it in a separate container with the used solution or
descaling agent.
6. Leave everything until the lime has dissolved completely.
7. Afterwards, pour some of the liquid out of the lower part so that the safety valve is no longer in the liquid.
8. Make sure the sieve and gasket are properly inserted in the upper part of the coffee maker. Place the upper
part straight on the lower part, so that they do not jam and turn both parts tightly together. Attention! Do not
add espresso powder.
9. Place the coffee maker on the base plate and switch on the device. If the whole liquid has flowed into the
upper part, remove the coffee maker from the base plate. Once the coffee maker has cooled down, repeat
the process one to two times with the used solution.
10. After that, clean the coffee maker again, as in " Thorough cleaning".
Maintenance
Attention! The coffee maker works with overpressure. All individual parts have a safety-relevant function, so that
the perfect condition of all parts must be given at all times!
This can only be guaranteed if:
· cleaning and descaling must be carried out properly at the necessary intervals. Please observe the corresponding
instructions in this manual.
· all parts that show visible signs of wear or other damages are replaced. Use original accessories only. For this
contact the authorized dealer.
cilio coffee makers are in compliance with the relevant safety regulations. Defective or damaged products as
well as the improper repair of such products can put the user at significant risk. The improper use and lack of
care and cleaning of the product may lead to a loss of all warranty claims.

Technical specifications

Operating voltage:
Power consumption:
Intended for household use only!
Do not immerse in liquids!
14
220 – 240 V / 50 Hz
480 W