Other Functions; Using Rds Functions; Program Service Name Display - Honda DEH-M6156ZH El Manual Del Propietario

AUTO SELECT .......... [5]
Broadcasts of high output stations can
be memorized in button [12] of UKW
band according to the following
procedure.
1. Press button [5] to start automatic
memorization of high output stations.
Through automatic memorization
operation,"A.SEL" 4 is displayed.
(A.SEL flashes 4)
Advice
• There is no audio output in
automatic memorizing operation.
• When automatic memorization is
started with U1/U2 band, the same
is performed for UKW band that is
automatically switched on to
follow U1 and U2 bands.
• Automatic memorization cannot
be activated for MW and LW
bands.
2. With completion of general automatic
memorization, the radio receives
broadcast of the highest output
station.
All manuals and user guides at all-guides.com
Advice
[8]
• When the set fails in finding the
especially highest output station
out of memorized stations, "0"
appears on the display.
• In the case memorized stations are
five or less in number, the display
indicates "0" when button [13] in
which no station is memorized is
pressed.

OTHER FUNCTIONS

Stereo Indicator
When the radio is tuned to an FM stereo
station, "ST" 6 will be displayed.

USING RDS FUNCTIONS

What is RDS?
RDS (Radio Data System) is a system
for transmitting data signals along
with FM programs. These data signals,
which are inaudible, provide a variety
of features such as: program service
name, program type display, traffic
announcement standby, automatic
tuning, and program type tuning,
intended to aid radio listeners in
tuning to a desired station.
• RDS services may not be provided
by all stations.
• RDS functions, like AF and TA, are
only active when your radio is tuned
to RDS stations.
PROGRAM SERVICE NAME
DISPLAY
Displays the name of the network/
station when you tune in a station
providing RDS services.
When you tune in to a RDS station, the
frequency display automatically changes
to the name of the network/station after
a few seconds.
DISPLAYING BROADCAST
STATION INDICATIONS
.................................
[12]
You can switch broadcast station
display ON/OFF.
1. Press button [15] for 2 seconds or
longer to select the function setting
mode.
2. Each time you press button [12] 3,
broadcast station display switches
ON/OFF.
Advice
• Some broadcast stations may
transmit multiple PS broadcasts
consecutively. If this happens,
precise PS display may not be
possible.
[15]
2
9 9