Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
Advice
• When a two-speaker system is
used, you should set "FAD C".
TIME DISPLAY/SETTING
Displaying the time ................ [11]
Press button [11] and the time is
displayed.
To cancel the display, press button
[11] again.
In the initial setting, the time is
displayed.
Advice
• If the time is not adjusted, time
indications continue flashing.
Setting the Hours ..... [11]
While pressing the [11] button, press
button [12] 1 to set the hour.
Setting the Minutes
.................................... [11]
While pressing button [11], press
button [12] 2 to set the minute. When
you release button [11], the second
count begins from 00 seconds.
All manuals and user guides at all-guides.com
Synchronizing with the time
announcement ......... [11]
While pressing button [11], press
button [12] 3 to reset the minute and
second indications to zero.
Example: When synchronizing
between 11:30 and 12:29.
SWITCHING BETWEEN 12 HOUR
AND 24 HOUR TIME DISPLAYS
.................................... [12]
1. Press button [15] for 2 seconds or
longer to select the function setting
mode.
2. Each time you press button [12] 5,
the display changes as shown
below.
[12]
12H (12 hour indications)
24H (24 hour indications)
[12]
OFF (No clock display)
Advice
[12]
• If you do not perform an operation
within 5 seconds of selecting the
function setting mode, the
function setting mode is canceled.
• You can also cancel the function
setting mode by pressing button
[15].
• Even if power to this unit is
switched OFF, time indications
continue to be displayed unless
2
[15]
switched OFF.

OTHER FUNCTION

Illumination
The radio illumination is linked to the
car light switch, and the button area
lights up when the car lights are
turned on.
Advice
• [2] lights when a CD is loaded.
7
Tabla de contenido
loading

Este manual también es adecuado para:

08a02-3c6-20008a02-3c6-210

Tabla de contenido