KTM Power Parts 47205907000 Manual De Instrucciones página 6

6
Final steps
Make sure that the exhaust system is not touching any other parts of the motorcycle.
Remove all grease residue with a soft cloth sprayed with multi-purpose lubricant.
Cleaning prevents stains baking onto the surface. Do not use aggressive chemical cleaners.
Make sure that all screws are tightened. If the exhaust system is touching the trim or other parts, readjust the unit or
contact your authorized dealer.
When the exhaust system is fi rst put into operation, it is normal for white smoke to be emitted by the silencer.
Finally, check for leaks in the whole exhaust system.
Do not stand behind the exhaust when it is being used for the fi rst time.
Maintaining the exhaust system
Clean with a multi-purpose lubricant spray.
A change in color of the exhaust system is normal due to the high temperatures.
Check periodically that all screws are tightened suffi ciently and that the springs are seated correctly.
- Mount screw and tighten to 10 Nm.
- Tighten screw to 10 Nm.
- Mount screw and tighten to 10 Nm.
NOTE
The speed nut is preassembled on the header.
- Tighten screw to 10 Nm.