Young America SSC 1400 Instrucciones De Montaje página 8

Step 3:
Position (1) Crib Side, as shown in Fig-

ure 7, by aligning the Locater Pin on
the top edge of the Base Rail with the
hole in the bottom rail of the Crib Side.
Gently spread the top of the Crib Ends

to allow the Locater Pins in the Crib
Ends to engage the holes in the ends of
the Crib Side top rail. See Figure 8.
Insert (4) 2" Connector Bolts into the

holes that are in the end uprights of the
Crib Side. Loosely attach the Crib
Side to the Crib Ends using the pro-
vided wrench. Do not tighten the bolts
at this time. See Figure 9.
Tighten the connector bolts that attach

the Base Rail to the Crib Ends at this
time with the provided wrench. See Fig.
4 on Page 7.
Attach the remaining Base Rail and Lo-

cater Pins following Step 2 on page 7.
Do not completely tighten Base Rail
bolts at this time.
Figure 10 is how your Crib should

look at this point.
Figure 8.
See
Figure 9.
All manuals and user guides at all-guides.com
Attaching the Crib Side
Figure 7.
Enlarged View of
Crib Side alignment
Figure 8.
Enlarged View of
Crib End - Crib Side
alignment
Figure 9.
Enlarged View
Wrench
2" Bolt
8
Fig. 8
Base Rail
Crib End
Crib Side
Locater Pin
Assembled View
Fig. 9
Figure 7.
Align Crib Side
Figure 10.