Cd & Cd+G - auna SingSing BT Manual De Instrucciones

EN
20
CD & CD+G
Notes on the Use of CDs
Only use functional CDs with the following label:
• This appliance is not compatible with MP3 CDs.
• A dirty or scratched CD may skip during playback and cause other
problems. Clean or replace the CD.
Loading a CD
1. Press the POWER button to turn on the appliance.
2. Press the Open button on the CD door to open it.
3. Insert a CD, CD-R/RW or CD+G into the karaoke appliance with the
label side facing up
4. Close the CD door.
Playing a Loaded CD
1. Connect the supplied microphone to the MIC 1 or MIC 2 microphone
input.
2. Press the Play/Pause button to start playing the loaded CD.
BT
If the appliance has never been connected to a BT device, you will need to
follow the pairing instructions below to connect the karaoke machine to
your BT device.
NOTE: If you cannot connect the appliance to your BT-enabled device, turn
your appliance off and on again to resolve the problem.
1. Turn on the appliance.
2. Press and hold the Play/Pause/BT button for a few seconds to activate
BT. The BT indicator lights up.
3. Press and hold the Stop/Pair button for 4-5 seconds. The BT indicator
blinks and the appliance enters pairing/discoverable mode.
4. Turn on the BT function of your BT device and activate the search or
browse function to find the appliance in the list.