Napa 791-7332 Manual Del Usuario
Ocultar thumbs Ver también para 791-7332:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

BEFORE USING THIS DEVICE, READ THIS
MANUAL COMPLETELY AND THOROUGHLY,
UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND
MAINTENANCE REQUIREMENTS.
It is the responsibility of the device owner to make sure all
personnel read this manual prior to using the device. It is also
the responsibility of the device owner to keep this manual
intact and in a convenient location for all to see and read. If the
manual or product labels are lost or not legible, contact NAPA for
replacements. If the operator is not fluent in English, the product
and safety instructions shall be read to and discussed with the
operator in the operator's native language by the purchaser/owner
or his designee, making sure that the operator comprehends
its contents.
SPECIFICATIONS
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Ton @ 100 PSI
Low Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5/8"
Ram Travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7/8"
Ext. Screw Adj. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3/4"
Max. Height with Adapter . . . . . . . . . . . . . . . . . . . . . . 23-3/8"
Chassis Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-3/4"
Overall Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7/8"
Saddle Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2"
Wheel Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5"
Handle Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-1/2"
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 lbs.
791-7332
All manuals and user guides at all-guides.com
1
20 TON CAPACITY
AIR/HYDRAULIC ECONOMY
WARNING
• Read, study, understand and follow all instructions before
operating this device • Inspect the jack before each use.
Do not use if damaged, altered, modified, in poor condition,
leaking hydraulic fluid or unstable due to loose or missing
components. Make corrections before using • Lift only at
points of the vehicle as specified by the vehicle manufacturer
• User and bystanders must wear eye protection that meets
ANSI Z87.1 and OSHA standards • Do not exceed rated
capacity • This is a lifting device only. Immediately after
lifting, support the vehicle with appropriate means • No
persons should be under vehicle when jack is in use
• No alterations shall be made to this product • Use only
on a hard level surface • Always lower the jack slowly and
carefully • Do not use saddle adaptors or saddle extenders
between the stock lifting saddle and the load • Failure to
heed these warnings may result in serious or fatal personal
injury and/or property damage.
WARNING: This product can expose you to chemicals
including nickel, which is known to the State of California
to cause cancer and birth defects or other reproductive
harm. For more information go to
www.P65Warnings.ca.gov.
MODEL # 791-7332
TRUCK JACK
ASME PASE-2014
rev. 03/23/18
Tabla de contenido
loading

Resumen de contenidos para Napa 791-7332

  • Página 6: Especificaciones

    Si el manual o las etiquetas del producto se han perdido o protección para los ojos que cumpla con ANSI Z87.1 y las no son legibles, comuníquese con NAPA por unos repuestos. Si normas de OSHA. • No exceda la capacidad nominal. • Este el operador no domina el idioma inglés, el comprador/propietario...
  • Página 7: Información De Advertencia

    Si las etiquetas del manual o producto son ilegibles o no están en su lugar, deberá ponerse en contacto con NAPA para obtenerlas gratis. El comprador/ propietario o una persona designada deberá...
  • Página 8: Montaje

    All manuals and user guides at all-guides.com MANUAL DEL FUNCIONAMIENTO Y LISTA DE PIEZAS PARA 791-7332 MONTAJE CONSULTE POR FAVOR EL DIBUJO DE VISTA EN DETALLE EN ESTE MANUAL PARA IDENTIFICAR LAS PARTES. 1. Ensamble las dos mitades juntas, usando el perno y tuerca de seguridad provistos, asegurándose que las lengüetas guía del eje de liberación estén del mismo lado de la manivela.
  • Página 9: Diagnóstico De Averías

    El propietario del gato es responsable de mantener sus etiquetas en buen estado de conservación. Use una solución jabonosa suave para lavar el exterior del gato, sin aplicarla a ninguna de las partes del sistema hidráulico. Comuníquese con NAPA por unas etiquetas de repuesto si éstas no son legibles.

Tabla de contenido