Pt Test; Entering Test Mode; Insert A Test Strip; Entering The Strip Code And Lot Number (If Enabled) - Micropoint qLabs ElectroMeter Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 106

9. PT Test

9.1 Entering Test Mode

OFF
SET
VER
STRIP CODE
PT/INR
1505320
ON
LOT: 3050E0503
OK

9.2 Insert a Test Strip

9.3 Entering the Strip Code and Lot Number (if enabled)

When the test strip is inserted into the qLabs
will prompt the user to enter a 7-digit Strip Code.
If the displayed code and lot number (if enabled) match the code on the
pouch, press the "OK" button to confirm. Otherwise, press "
edit the strip code and lot number (if enabled).
When the qLabs
on by pressing the "OK" button, the display
screen will prompt the user to insert a
test strip. Go to Section 9.2 for test strip
insertion.
MEM
When the qLabs
on by inserting a fresh test strip, the display
screen will prompt the user to confirm the
strip's code. Go to Section 9.3 for entering
the strip code.
Remove a fresh test strip from its foil pouch.
Insert the strip into the test strip guide.
The following two observations indicate that
you inserted the strip correctly:
1. The electrode leads go in first.
2. You can read "PT-INR" clearly on the
ElectroMeter is turned
®
ElectroMeter is turned
®
blue area of the test strip from left to
right.
ElectroMeter, the display
®
16
EN
" button to
Tabla de contenido

Solución de problemas

loading

Productos relacionados para Micropoint qLabs ElectroMeter

Tabla de contenido