Troubleshooting; Post-Sale Service; Environmental Protection - Kunft KC6455 Manual De Instrucciones

2.4. troubleshooting

If you experience a problem with your appliance or are concerned
that the appliance is not functioning correctly, you can carry out some
easy checks before calling for service, please see below.
Warning! Don't try to repair the appliance yourself. If the problem
persists after you have made the checks mentioned below, contact a
qualified electrician, authorized service engineer or the shop where
you purchased the product.
Problem Possible cause & Solution
appliance is check whether the power cord is plugged into
not working the power outlet properly.
correctly
check the fuse or circuit of your power supply,
replace if necessary.
The ambient temperature is too low. Try setting
the chamber temperature to a colder level to solve
this problem.
odours from the The interior may need to be cleaned
compartments
Some food, containers or wrapping cause odours.
noise from The sounds below are quite normal:
the appliance
• Compressor running noises.
• Clicking noise before the compressor starts.
other unusual noises are due to the reasons
below and may need you to check and take
action:
• The cabinet is not level.
• The back of appliance touches the wall.
• Bottles or containers fallen or rolling.
The motor runs It is normal to frequently hear the sound
continuously of the motor; it will need to work harder under
n following circumstances:
• Temperature setting is colder than necessary.
• Large quantity of warm food has recently been
stored within the appliance.
• The temperature outside the appliance is too
high.
• Doors are kept open too long or too often.
• After you install the appliance or if it has been
switched off for a long time.
a layer of frost ensure food is placed within the appliance to
forms in the allow sufficient ventilation. Ensure that door is fully
compartment closed. To remove the frost, please refer to the
cleaning and care chapter.
28
refrigerator freezer
Temperature You may have left the doors open too long or too
inside is too frequently; or something is keeping the doors
warm open; or the appliance does not have sufficient
clearance at the sides, back and top.
Temperature Increase the temperature by following the
inside is too cold temperature regulation instructions.
Doors can't be check whether the top of the refrigerator is tilted
closed easily back by 10-15mm to allow the doors to self-close,
or if something inside is preventing the doors from
closing.
Water drips on The water pan (located at the rear bottom of
the floor the cabinet) may not be properly levelled, or the
draining spout (located underneath the top of the
compressor depot) may not be properly positioned
to direct water into this pan, or the waterspout
is blocked. you may need to pull the refrigerator
away from the wall to check the pan and spout.
The light is not The light may be damaged.
working

3. PoSt-SaLE SErvIcE

KUNFT has designed this appliance in order to guarantee maximum
reliability. However, if a problem occurs do not attempt to open the
appliance - there is a risk of electrical shock. If you are not able to
solve the problem, please contact the Customer Support Service
of any Worten, Modelo or continente store in order to be assisted.
Worten Equipamentos para o Lar provides a 2-year warranty for
manufacturing defects from the date of purchase of the appliance.
WARNING: any attempt to repair the appliance without contacting
the manufacturer or seller will void the warranty.
All users must be familiar with these instructions. Knowing what
could go wrong can help prevent problems from occurring.
4. ENvIroNMENtaL
ProtEctIoN
In order to protect the environment, we strive to reduce the volume of
packaging used, limiting it to three easily sorted materials: cardboard,
paper and plastic.
The appliance is manufactured using recyclable materials
after disassembled by a specialized company. Please
comply with local regulations concerning the recycling of
all materials.
29
EN
KC6455