Troubleshooting; Post-Sale Service; Environmental Protection - Kunft KSD2531 Manual De Instrucciones

4. Pull out the lamp cover.
5. Unscrew the lamp.
6. Fit the new lamp according to the directions opposite, and then
replace the lamp cover and screw.
7. Plug in the appliance and regulate the knob to the correct position.

2.4. Troubleshooting

Caution! Before troubleshooting, disconnect the power supply.
Only a qualified electrician or competent technician can perform any
troubleshooting that is not included in this manual.
Important! There will be some noises during normal use (compressor
and refrigerant circulation).
Problem Possible cause
Appliance The temperature
does not regulator knob is set to
work number "0".
Fuse has blown or is
defective
Socket is defective
The food is Temperature is not
not frozen properly adjusted.
enough.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Appliance Temperature is set too
cools too cold.
much
Unusual Appliance is not level.
noises
The appliance is touching
the wall or other objects.
A component, e.g. a
pipe, on the rear of the
appliance is touching
another part of the
appliance or the wall.
Water on Water drain hole is
the floor blocked.
The side The condenser is inside
panel is hot the panel.
If the malfunction appears again, contact the Service Center.
Solution
Set the knob at any other
number to switch on the
appliance.
Check fuse, replace if
necessary.
Mains malfunctions are
to be corrected by an
electrician.
Please look in the
Temperature Setting
section.
Open the door only as
long as necessary.
Turn the temperature
regulation to a colder
setting temporarily.
Please look in the
installation location
section.
Temporarily turn the
temperature regulator
knob to a warmer setting.
Re-adjust the feet.
Move the appliance
slightly.
If necessary, carefully
bend the component out
of the way.
See the Cleaning section.
This is normal.
16
refrigerator single door

3. POST-SALE SERVICE

KUNFT has designed this appliance in order to guarantee maximum
reliability. However, if a problem occurs do not attempt to open the
appliance - there is a risk of electrical shock. If you are not able to
solve the problem, please contact the Costumer Support Service
of any Worten, Modelo or Continente store in order to be assisted.
Worten Equipamentos para o Lar provides a 2-year warranty for
manufacturing defects from the date of purchase of the appliance.
WARNING: Any attempt to repair the appliance without contacting
the manufacturer or seller will void the warranty.
All users must be familiar with these instructions. Knowing what
could go wrong can help prevent problems from occurring.
4. ENVIRONMENTAL
PROTECTION
In order to protect the environment we strive to reduce
the volume of packaging used, limiting it to three easily
sorted materials: cardboard, paper and plastic. The
appliance is manufactured using recyclable materials
after disassembled by a specialized company. Please
comply with local regulations concerning the recycling of
all materials.
EN
KSD2531
17